Initial Setting; To Specify The Initial Setting - Konica Minolta bizhub 500 User Manual

Copy operations

Hide thumbs Also See for bizhub 500:

Table of Contents

Utility <User Setting>

3 Initial Setting

Specify the copy settings to be set automatically when the machine is reset.

The following two types of initial setting can be specified.

- Factory default: Settings specified when the machine is set up.

- Current setting: Settings specified from the touch panel before Utility

mode is entered.

The machine will be reset:

- when the machine is powered on

- when Auto Reset is operated

- when Power Save is operated

- when copy operation becomes available after the user/account authen-

tication has been successfully made

- when a key counter or copy card is inserted

- when [Reset] on the control panel is pressed

Factory default settings are as follows.

Basic settings: Print quantity 001, Simplex/Duplex 1>1, ADF On, Density

AE, Zoom 1.000, Auto Paper Select On

Combine Originals: Combine Pages Off, Original Direction Normal, Mar-

Original Image Type: Text/Photo

Application: Off

First specify the copy settings to be used as initial setting, if factory de-

fault is not desired.

Press the [Utility/Counter] to display the Utility/Counter Screen.

Touch [2 User Setting] to display the User Setting Screen.

bizhub 500/420