Konica Minolta bizhub 500 User Manual page 298

5
8
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
Note
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the set-
tings currently specified without touching [OK] to return to the Application
Screen or Basic Screen.
Reminder
Non-Image Area Erase function may not operate properly for dark origi-
nal. In this case, check this function using the original with white back-
ground.
This function may also perform incorrectly if the lighting in the work place
is directly over the original glass. In this case, consult your service repre-
sentative about an appropriate place for installation.
5-82
Application Functions
bizhub 500/420