Konica Minolta bizhub 500 User Manual page 310

5
7
Touch [Change Adjustment] on the Print Position Screen to make a fine
adjustment of the print position.
– Touch [Left] or [Right] under Left & Right Adjustment to highlight it.
Use [+] and [–] to enter a fraction in 1/16 in. increments. Touch the
bidirectional arrow key to move the cursor, then use [+], [–], or con-
trol panel keypad to enter whole number part of the desired value.
Similarly, touch [Top] or [Bottom] under Top & Bottom Adjustment
to highlight it, then enter the desired value.
To deactivate these adjustment, touch [No Adj.] for each.
Do you want to change the currently entered value using control
?
panel keypad?
% Press [C] (Clear) on the control panel, then enter the correct value.
What if the value just entered is out of available range?
?
% The Input Error message will be displayed. Press [C] (Clear) on the
control panel, then reenter the correct value.
5-94
Application Functions
bizhub 500/420