Troubleshooting
3
After the procedure is finished, the Basic Screen is displayed.
–
If paper misfeeds occurred at multiple locations, the JAM Location
Display Screen is restored. Check the screen for messages and the
location of the next misfeed to be cleared, and then repeat steps 1
and 2.
–
After all paper misfeeds have been cleared, the Basic Screen is re-
stored.
7 CAUTION
Precaution for electrical shock
High voltage is generated around the drum unit inside the right side door of
the machine.
%
In order to reduce the risk of electric shock, do not touch any part in
this unit when clearing paper misfeeds.
7 CAUTION
Precaution for high temperature
The fusing unit inside the right side door of the machine is extremely hot.
%
In order to reduce the risk of burns, do not touch any part in this unit
when clearing paper misfeeds.
7 CAUTION
Precaution for getting injured
%
Be careful of removing staples stuck inside the machine so as not to
get injured.
7 CAUTION
Precaution for high temperature
Parts around the rail for stapler of the Finisher FS-510 are extremely hot.
%
In order to reduce the risk of burns, do not touch any part in this unit
when clearing paper misfeeds.
bizhub 500/420
11
11-7