To Specify Output Mode - Konica Minolta bizhub 500 User Manual

6

To specify output mode

0 As the default setting, Group is selected. When 2 sets or more are en-
tered, automatically output in sort mode.
0 Some copy condition is incompatible with Group. For details, see "Copy
Conditions Incompatible with Finishing/Folding" on page 6-26.
0 If no finisher is installed and the following conditions are met, printed
copies can be fed out and sorted in an alternating crisscross pattern.
8-1/2 × 11- or 5-1/2 × 8-1/2-size paper is used.
Paper of the same size and type is loaded with the crosswise orientation
v in one paper tray and with the lengthwise orientation w in other tray.
"Auto Paper Select" setting is selected.
The "Auto Paper Select" setting is not selected when the Mixed Original
setting is selected.
0 The output tray capacity is max. 250 sheets. If a copy run of more than
250 is required, be sure to remove the copies from the output tray before
the maximum capacity is reached.
1
Position the original to be copied.
2
Using the keypad, enter the desired number of copies.
3
Load copy paper into the tray.
– When using an alternating crisscross pattern, load 8-1/2 × 11- or 5-
1/2 × 8-1/2-size paper with crosswise orientation v in one paper
tray and with the lengthwise orientation w in other tray.
4
Touch [Finishing] on the Basic Screen.
The Finishing Screen will be displayed.
6-4
Finishing/Folding
bizhub 500/420