Konica Minolta bizhub 500 User Manual page 93

Copy operations

Hide thumbs Also See for bizhub 500:

Table of Contents

Before Making Copies

The Operating Time Setting screen will be displayed.

Enter the duration of machine operation from the keypad on the control

Enter the duration before the machine enters the Sleep mode again.

Specify a length of time between 5 minutes and 9 hours and 59 min-

The Basic Screen is displayed with the message "Ready to copy".

Copy functions become available.

If only one digit is to be specified for the duration, make it two digits by

adding 0 for the tens place. If the duration of less than 5 minutes is spec-

ified, it is automatically changed to 5 minutes.In addition, a minutes set-

ting of 60 or more cannot be specified.

If you finish using the machine before the set length of time, you can

press and hold the [Power Save] key to apply the Sleep mode.

bizhub 500/420

Troubleshooting