Konica Minolta bizhub 500 User Manual page 572

15
5
Select the Power Save mode to be set manually when [Power Save] on
the control panel is pressed.
– Touch [Power Save Key].
Select [Low Power] or [Sleep] under "Job Setting" in the right side
area of the screen.
Low Power selected: Energy saving condition will be entered with
the touch panel blacked out.Sleep selected: More energy can be
conserved than Low Power. However, it takes longer to recover the
standby state because the machine needs warmup.
6
If further changes are required, touch the desired key.
Note
The Low Power Mode Setting and Sleep Mode Setting can be accessed
also from the User Setting Screen if the Administrator Security Level in
the Administrator Setting is set to Level 1 or Level 2.
15-28
Utility <Administrator Setting>
bizhub 500/420