Zoom Setting; To Copy In Full Size (×1.000) Mode - Konica Minolta bizhub 500 User Manual

3
3.7

Zoom Setting

Use this setting in order to make a copy using different-sized paper from the
original, or to enlarge/reduce the image size.
The machine is initially set to make a copy in full size (×1.000) mode.
This section describes how to make the Zoom setting.
To copy in full size (×1.000) mode
Use this mode to make a copy of the same size as the original image irre-
spective of the paper size to be used.
0 The full size (×1.000) mode is initially specified as default. If setting
change has been made, follow the procedure below to specify this mode.
0 Pressing [Reset] on the control panel will resume the full size (×1.000)
mode, unless the initial setting with that mode specified has not been
changed. In this case, other setting changes will also return to the initial
condition.
0 Use the [+] and [–] keys on the Zoom Screen to make a fine adjustment
on specified magnification ratio. Touch [+] to increase, or [–] to decrease
the ratio in 0.001 increments.
1
Touch [Zoom] on the Basic Screen.
The Zoom Screen will be displayed.
3-30
Basic Copy Operations
bizhub 500/420