Paper Setting For Bypass Tray; To Automatically Detect The Paper Size (Auto Detect) - Konica Minolta bizhub 500 User Manual

3
3.6

Paper Setting for Bypass Tray

This section describes how to specify the size and type of copy paper loaded
in the bypass tray.
The bypass tray is generally used in the following cases.
- Auto Detect Setting
Used as one of the trays loaded with normal paper of the size available
for Auto Paper Select.
- Custom Size Setting
Used when loading paper of special size that cannot be loaded in other
trays.
- Paper Type Setting
Used when loading paper of special type that cannot be loaded in other
trays.
!
Detail
Special paper type can also be loaded in the other trays on a regular ba-
sis. The paper type setting for these trays is provided in User Setting of
the Utility/Counter Screen. See page 14-10 for details.
The custom size setting is unavailable for the trays except bypass tray.
For details on loading paper in the bypass tray, see "To load paper into
the bypass tray" on page 2-58.

To automatically detect the paper size (Auto Detect)

Use this function to automatically detect the standard paper size loaded in
the bypass tray.
0 Standard sizes available for Auto Detect in bypass tray: 11×17 w, 8-1/
2×14 w, 8-1/2×11 w/ v, 5-1/2×8-1/2 v, A4 w
0 Auto Detect is initially set for the bypass tray.
1
Touch [Paper] on the Basic Screen.
The Paper Screen will be displayed.
3-20
Basic Copy Operations
bizhub 500/420