Appendix B: Field Installable Accessories - HindlePower AT30 SERIES Operating And Service Instructions

FIELD INSTALLABLE ACCESSORIES AND OPTIONS
All options and accessories listed below are available in kits for field
installation. Kits contain all parts and hardware with detailed installation
instructions. To order accessories/options, please provide the following
information for each kit:
• Model number, enclosure style, and serial number of your AT30
• Factory part number and description, from the table below
• Quantity required
Contact your sales representative to place an order for options & accessories.
standard DC Output Filtering (per NEMA PE5-1996)
Battery Eliminator Filtering (per NEMA PE5-1996)
Auxiliary Alarm Relay PC Board (A5) option
Copper Ground Bus with one (1) box lug
AC Input Lightning Arrestor (VR3) option
Wall-Mounting Kit for Style-5018 Enclosure
Relay Rack-Mtg. Kit for Style-5018 Enclosure (23-24in/584-610mm)
NEMA-2 Type Drip Shield for Style-5018, -5030, -163 Enclosure
Cabinet Heater Strips for Style-5018 Enclosure
Cabinet Heater Strips for Style-5030 Enclosure
Cabinet Heater Strips for Style-163 Enclosure
Padlock for Style-5018, -5030, -163 Enclosure Front Panel Door
Remote Temperature Compensation Probe Assembly (A10)
DNP3 Level 2 / Modbus Communications Module
Forced Load Sharing Accessory
Remote Temperature Compensation Probe
The temperature compensation accessory consists of two (2) components:
1. To order a replacement probe (or puck), request part number EJ5032-00. This
probe (A10) is good for all AT10.1 output voltages and all battery types.
2. The standard temperature compensation assembly is supplied with a 25ft / 7.6m
interconnection cable. If you need a longer cable, order it from the table below,
which also lists the ordering part number for a complete accessory.
Cable Length
(feet / m)
25 / 7.6
50 / 15.2
100 / 30.5
200 / 61.0
Use a single cable assembly. Do not try to splice cables together to increase the length.
Description
Temperature Compensation Probe Kits
Kit Part Number
(includes probe)
EJ5033-00
EJ5033-01
EJ5033-02
EJ5033-03
APPENDIX B
Kit Part Number
contact your sales rep.
contact your sales rep.
EI0213-02, -03, -04
EI0195-02, - 03, -03
EJ1074-02
EI5008-00
EI0193-03
EI0191-02, - 03, -04
EJ5042-00
EJ5166-00
EJ5183-00
EI0215-01, - 01, -02
see table below
see Appendix E
EJ5126-##
Replacement Cable
Part Number
EJ5011-00
EJ5011-01
EJ5011-02
EJ5011-03
65