HindlePower AT30 SERIES Operating And Service Instructions page 9

PROCEDURE (Style-5030)
1. Install four (4) 0.375 / 9.5mm or 0.5in/12.7mm anchor bolts into the floor,
per the mounting dimensions featured in the outline drawing (JE5086-00).
2. Carefully lift the AT30 above the anchor bolts using the methods described
in Section 1.4. Guide the enclosure onto the floor bolt pattern and lower it
into place.
3. Add appropriate mounting hardware onto the floor-mounting anchor bolts
and tighten securely.
PROCEDURE (Style-163 / Style-198)
1. Install four (4) 0.5in/12.7mm anchor bolts into the floor, per the mounting
dimensions featured in the outline drawings
2. Carefully lift the AT30 above the anchor bolts using the methods described
in Section 1.4. Guide the enclosure onto the floor bolt pattern and lower it
into place.
3. Add appropriate mounting hardware onto the floor-mounting anchor bolts
and tighten securely.
GRAPHICS - STANDARD NEMA-1 TYPE AT30 ENCLOSURES
Style-5018
see outline drawing
JE5085-00
Style-5030
see outline drawing
JE5086-00
INSTALLING THE AT30
(JE5095-00 / JE5096-00).
Style-163
see outline drawing
JE5095-00
5