Finisher Staple Unit Counter At End Of Life - Xerox Phaser 7400 Service Manual

Finisher Staple Unit Counter at End of Life

Applicable Status Code:
Code F142:
Staple Unit at End of Life
Initial Actions:
Cycle the printer's power.
If the problem persists follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Stapler
Troubleshooting Procedure Table
Step Actions and Questions
1 Replace the Stapler.
Cycle printer power.
Does the error persist?
3-142
Wiring and Plug/Jack References
Options Map 1 Finisher Controller Board
Options Finisher Controller to Printer
Yes
Replace the Engine
Control Board
NVRAM.
If the error persists,
replace the Engine
Control Board
(page 8-112).
Phaser 7400 Color Printer Service Manual
No
Complete.