Waste Toner Reservoir Detect Switch - Xerox Phaser 7400 Service Manual

Waste Toner Reservoir Detect Switch

An actuator on the back of the Front Door penetrates the Waste Toner Reservoir to
activate a switch mounted in a sensor housing attached to the frame.
1. Open the Top Cover.
2. Remove the HVPS Cover (page 8-118).
HVPS
3. Disconnect CN2 from the HVPS
4.
Open the Front Door.
5.
Remove the Waste Toner Reservoir if installed.
8-130
Waste Toner Reservoir Detect Switch Connector
Phaser 7400 Color Printer Service Manual
s7400-516