Top Output Tray; Side Output Tray; Finisher/Inverter - Xerox Phaser 7400 Service Manual

Top Output Tray

The Top Output Tray is a facedown, 500-sheet tray located on the printer's Top Cover.
The tray receives paper from the Exit Assembly which includes a Job Offset
Assembly for offset output capability.

Side Output Tray

The Side Output Tray is a faceup, 250-sheet tray located on the printer's left side.
Installation of the Finisher requires that this tray be closed and locked.

Finisher/Inverter

What follows is a summary of the output path through the Finisher. A detailed
description of the Finisher paper path appears in Book 2, Section 2.
Paper fed from the printer's left side exit enters the Finisher and passes through the
Finisher Punch. If punching is specified, the Punch sensors align the sheet and punch
the prescribed holes. The sheet is then transferred to the Compiler Tray for stacking.
If stapling is specified, the stack is drawn into the Stapler and the Staple Head places
a staple at the point specified then the Compiler Tray ejects the stapled stack to the
Upper Tray. For Saddle stitching, the stack is drawn through the Stapler and stapled at
the center point. The stapled stack continues through the Stapler and is folded in the
Saddle Unit. The stapled and folded stack is delivered to the Lower Tray.
s7400-386
2-38 Phaser 7400 Color Printer Service Manual