Right Side Cover - Xerox Phaser 7400 Service Manual

Right Side Cover

Removal of the Right Side Cover from printers with optional trays installed requires
the right hand side of the print engine to be lifted approximately three inches to clear
the lower tray. Use a ream of paper, or similar object, to hold the printer above the
LTA while removing the cover.
Caution
Use care not to over stress the plastic while prying the cover to release the hooks.
1.
Remove the Lower Rear Cover (page 8-14).
2.
Pull out Tray 2 to access 1 (metal, 10 mm) screw on the left side of the Right Side
Cover.
3.
Remove 1 (metal, 10 mm) screw from the right side of the Right Side Cover.
4. Using a small screwdriver release the 2 hooks at the top and bottom of each hand
hold.
5. Release the hook at the right.
6.
Lift printer up slightly and remove the Right Side Cover.
Hook
Hooks
8-16
Right Side Cover
Hook
Phaser 7400 Color Printer Service Manual
s7400-178