Transfer Unit Fan - Xerox Phaser 7400 Service Manual

Transfer Unit Fan

The Transfer Unit Fan is located directly behind the Cyan Imaging Unit Motor.
1.
Remove the Rear Cover (page 8-13).
2.
Remove the Right Rear Cover (page 8-15).
3. Remove the Card Cage Fan Duct (page 8-114).
4. Remove the Card Cage (page 8-117).
5.
Remove 2 (metal, 6 mm) screws that secure the Cyan Imaging Unit Motor.
Transfer Unit Fan
6.
Remove 2 (metal, 23 mm) screws with washers that secure the Transfer Unit Fan
to the frame.
7.
Release the fan wiring from the clamp.
8. Disconnect the fan from the Motor Driver Board.
8-134 Phaser 7400 Color Printer Service Manual
s7400-585