Changing Program Languages - Dish Network DishPro User Manual

Chapter 3
Using the System
Tip: You can
choose an alter-
nate language (if
available) but this
applies only to the
audio part of a
program and does
not change the
language used in
the menus
displayed by the
receiver.
Page 50
Note: Resetting the receiver discards all Favorite Lists except the All
Chan and All Sub lists.
Note: If you have set any locks on the receiver, and the receiver is
locked, these locks will be kept. If the receiver is unlocked, any such
locks will be lost. You cannot reset the receiver to default settings to
discard a password you have forgotten. Nobody can reset the receiver
to bypass a receiver lock.
1. Press the Menu button.
2. Select the System Setup option.
3. Select the Installation option.
4. Select the Factory Defaults option.The receiver displays a
Warning message, prompting you to confirm that you want to reset
the receiver.
5. Select the Yes option to confirm the reset. The receiver resets, and
then displays the Installation and Setup menu.
C P
HANGING ROGRAM
You may be able to change the language of some programs. An alternate
language may not be available for all programs. Some programs, such as
movies, show at the start whether an alternate language is available. An
alternate language applies only to the audio part of a program and does not
change the language used in the menus displayed by the receiver.
1. Press the Menu button.
2. Select the System Setup option.
3. Select the Alternate Audio option.
4. Select the language you want in the Languages list.
Note: If the program is available in a language not listed, then
selecting the Alternate option selects that language. If the program is
available only in the listed languages, then selecting the Alternate
option selects English.
L
ANGUAGES