Dish Network DishPro User Manual page 42

Chapter 3
Using the System
Page 40
10. Select the Timers option.
The receiver displays the Event Timer Management menu.
11. Select an event timer that you want to delete. A check mark appears in
the box next to the event timer.
12. Move to Delete and press Select on the remote.
Do this again for any other timer(s) that you want to delete.
R E T
EVIEWING VENT IMERS
You can review event timers by using the Event Timer Management
menu.
1. Press the Menu button.
2. Select the Timers option.
The receiver displays the Event Timer Management menu.
Creating VCR Event Timers
• To use VCR Event Timers, you must connect the receiver's back
panel audio/video outputs to the audio/video inputs on the VCR.
• To use VCR Event Timers, you must set up the receiver to control the
VCR (see page 41 to learn how to do this). If the receiver can't control
the VCR, use an Auto-Tune Event Timer to tune the receiver to the
channel you want to record. Use the timers built into the VCR to start
and stop the VCR at the right times.