Dish Network DishPro User Manual page 39

3. Select the Create option. The receiver displays the Create a Manual
Event Timer menu.
4. Select a Timer Type option.
5. Select a Timer Frequency option.
6. Select a channel:
Either: Highlight a channel using the Up or Down arrow button. Then,
press the Select button.
Or: Enter a channel number using the number buttons.
7. Select the Set Date/Time option. The receiver displays the Set Date/
Time for Manual Timer menu.
8. Use the number buttons to enter the Start Time (this includes selecting
AM or PM) and the End Time, (this includes selecting AM or PM).
9. Use the number buttons to enter the Date.
10. Select the Create Timer option.
Either: To create another event timer, select the Create option again.
Or
Or: If you do not want to create another event timer, press the Cancel button.
Note: You cannot set a manual event timer for a pay per view event.
Q R
UICK ECORD
You can quickly create a one-time VCR Event Timer. Do the following.
1. Highlight a future program in the Browse Banner, the Program
Guide or a
Themes
2. Press the Record button. Note: For this to work, you must set up the
receiver to control your VCR. For information on doing this, turn to
page 41.
menu.
Using Timers
lPage 37