Dish Network DishPro User Manual page 32

Chapter 3
Using the System
Page 30
O B
PENING THE ROWSE
To open the Browse Banner, press the remote control Right arrow
button. An example of an open Browse Banner is shown below.
D I
ISPLAYING NFORMATION ON
1. Press the remote control Right arrow button to open the Browse
Banner for the program that you are watching
Note: Your Browse Banner may look a bit different than the one
shown here.
2. Either: Enter the channel number for the program that you want, using
the number pad buttons
Or: Press the Up or Down arrow button to display the channel
that you want.
3. Press the Right arrow button to display the next program. Press the
Left arrow button to return to the current program.
Note: The Browse Banner displays programs that are on now.
If you press the Right Arrow, it will display information on the
program that is on next on the same channel. It does not display
information for any other programs in the future and cannot
display programs that have ended.
4. You may press the Information button for more information about the
program listed.
C C
HANGING HANNELS
If you are using the Browse Banner and see a program that you want to
watch, press the Select button to change to the new channel. Make sure
the program is displayed in the bottom part of the Browse Banner.
Note: If the program is on some time in the future, the receiver will
open the Create An Event Timer menu.
B
ANNER
O P
THER ROGRAMS
U B
SING THE ROWSE
B
ANNER