Dish Network DishPro User Manual page 47

If the receiver is not already locked, you must lock it to put the locks you just
created into effect.
L R
OCKING THE ECEIVER
1. Press the Menu button.
2. Select the Locks option.
3. Select the Lock System option.
The receiver displays a message prompting you to enter a password.
Note: If this option appears as Unlock System instead, the receiver is
already locked.
4. Enter and check a password, using the number pad buttons. The receiver
displays stars (*) as you enter the digits of the password. Write down the
password and put it in a safe place. From now on, you must enter this
password to lock or unlock the receiver.
5. Select the OK option. Enter the password again.
U R
NLOCKING THE ECEIVER
If you unlock the receiver, leave the locks unchanged and then lock the
receiver again, the same locks will be in effect as before.
1. Press the Menu button to display the Main Menu.
2. Select the Locks option.
3. With the receiver locked, you must enter the password using the number
pad buttons. The receiver displays stars (*) as you enter the digits of the
password. As soon as you enter the fourth digit of the password, the
receiver highlights the OK option.
4. Press the Select button.
5. Select the Unlock System option.
If this option appears as Lock System instead, the receiver is already
unlocked.
L R
OCKING THE ECEIVER
This keeps anyone from changing the channel, but it does not lock the remote
control buttons.
F P C
RONT ANEL ONTROL
B
UTTONS
Using Locks
Tip: You can lock
the receiver front
panel control
buttons but this
does not lock the
remote control
buttons.
lPage 45