Dish Network DishPro User Manual page 22

Chapter 3
Using the System
Page 20
V B
OLUME UTTON
Press the left-hand, minus (-) side of this button to lower the sound
volume. Press the right-hand, plus (+) side of this button to raise the sound
volume. Note: You must program the remote to control your TV for the
Volume button to work as described.
TV or Amplifier Volume Control
If you set up the remote to control a television, the Mute and
Volume buttons - in any mode - control the TV volume. This does
not apply if you use the AUX mode to control a device that has a
volume setting.
If you want to control a device that has a volume setting, using
any remote mode, do the following:
1.Press and hold the AUX mode button for three
seconds, then release it.
2.Press the Pound (#) button.
3.Press the plus (+) side of the Volume button.
4.Press the 0 number button.
5.Press the Pound (#) button. The AUX mode
button backlight blinks three times.
To switch back to TV volume control, do the following:
1.Press and hold the TV mode button for three
seconds, then release it.
2.Press the Pound (#) button.
3.Press the plus (+) side of the Volume button.
4.Press the 0 number button.