Scanning Timeout - CipherLab Cipher Lab 1560 User Manual

1560 Series Barcode Scanner

1.7 SCANNING TIMEOUT

Specify the scanning time interval (1~254 sec.; 0= Disable) when the scan mode is set
to any of the following –
Laser mode
Auto Off mode
Auto Power Off mode
Aiming mode
1) Read the barcode above to specify the time interval before the scan engine times out.
2) Read the "Decimal
scanner to automatically shut down after idleness of 15 seconds.
3) Read the "Validate" barcode on the same page to complete this setting.
44
User Guide
Value" barcode on page 227. For example, read "1" and "5" for the
Scanner Time-out
after 0~254 sec.
(*10)
Enter Setup