Gs1-128 (Ean-128); Code Id Transmission; Field Separator (Gs Character) - CipherLab Cipher Lab 1560 User Manual

4.10 GS1-128 (EAN-128)

Note: When this setting is disabled, GS1-128 barcodes used to be taken as Code 128.
However, starting from firmware version 1.01, GS1-128 barcodes can be decoded
only when this setting is enabled.

4.10.1 CODE ID TRANSMISSION

Decide whether to include the Code ID ("

4.10.2 FIELD SEPARATOR (GS CHARACTER)

Decide whether to apply a field separator (to convert the
readable character).
1) Read the barcode above to enable field separator.
2) Read the "Hexadecimal
3) Read the "Validate" barcode to complete this setting.
Note: GS1-128 barcodes start with the
from other uses of Code 128.
GS1-128 barcodes.
") in the data being transmitted.
]C1
Value" barcode on page 228 for the desired character string.
FNC1
is also used to separate data fields in the
FNC1
Chapter 4 Changing Symbology Settings
Enable
*Disable
Transmit Code ID
*Do Not Transmit
control character to human
FNC1
Enable Field
Separator...
control character to distinguish themselves
Update
137