Data Length - CipherLab Cipher Lab 1560 User Manual

1560 Series Barcode Scanner

6.3.2 DATA LENGTH

The length must include prefix, suffix (0x0d by default), length code, etc. By default,
barcodes of any length (character count) are eligible for data editing.
You may specify a value from 0 to 254.
When zero is given to both, the scanner will not perform the length qualification.
1) Read the barcode below to specify Max. Length or Min. Length separately, and follow
steps 2~3.
2) Read the "Decimal
3) Read the "Validate" barcode on the same page to complete this setting.
190
User Guide
Value" barcode on page 227 for the desired length.
Max. Length
Min. Length
End Programming Format