Continuous Mode; Test Mode - CipherLab Cipher Lab 1560 User Manual

1560 Series Barcode Scanner

1.6.1 CONTINUOUS MODE

The scanner is always scanning.
After a successful decoding, the removal of barcode is required. It is not allowed to
proceed to decode until the decoding delay time has passed.
To decode the same barcode repeatedly, move away the barcode and put it back
again and again for scanning.
Note: Refer to "Delay between Re-read".
Decoding Delay
Set the time interval between each decoding.

1.6.2 TEST MODE

The scanner is always scanning.
Capable of decoding the same barcode repeatedly without removing it, for testing
purpose.
40
User Guide
Continuous Mode
*Disable
0.5 sec
1 sec
2 sec
Test Mode
Enter Setup