Code Id; Select Pre-Defined Code Id - CipherLab Cipher Lab 1560 User Manual

5.4 CODE ID

Up to two characters for Code ID can be configured for each symbology. To make the
Code ID configuration easier, the scanner provides five pre-defined Code ID sets that you
can select one and make necessary changes on it.
If "BT HID", "USB HID" or "Keyboard Wedge" is configured for interface,
and Key Status
Key Status when "Normal Key" is selected for Key Type.
Key Type
Scan Code Only 1 scan code value is allowed.
Normal Key Up
allowed.
Note: "]C1" is the Code ID of GS1-128 (EAN-128) barcodes; "]e0" is the default Code ID
of GS1 DataBar (RSS) barcodes.

5.4.1 SELECT PRE-DEFINED CODE ID

will then become applicable. You may decide whether or not to apply
to 2 character strings
Chapter 5
Key Status
N/A
Add Shift
are
Add Left Ctrl
Add Left Alt
Add Right Ctrl
Add Right Alt
Refer to Keyboard Wedge
Apply Code ID Set 1
Apply Code ID Set 2
Apply Code ID Set 3
Apply Code ID Set 4
Apply Code ID Set 5
Update
Defining Output Format
Key Type
Table.
165