Field Settings - CipherLab Cipher Lab 1560 User Manual

1560 Series Barcode Scanner

6.4.4 FIELD SETTINGS

Data eligible for editing formats is divided into fields by user-specified rules – either
using the field terminating string or specified field length.
By Terminating String
Specify the field terminating string. Up to two characters are allowed. The scanner will search for
the occurrence of this particular string in the data.
By default, this string will be included in the field. You may discard it.
By Length
Alternatively, you may simply specify the field length. The scanner will assign the next specified
number of characters into the field.
Field 1 Setting
1. Read the barcode below to divide field 1 by a specified terminating string.
2. Read the "Hexadecimal
3. Read the "Validate" barcode to complete this setting.
4. Read the "Discard Separator" barcode if the field separator is not desired in the field.
If not dividing the field by a specific separator, you may divide it by a specified length.
1. Read the barcode below to divide field 1 by length.
2. Read the "Decimal
3. Read the "Validate" barcode on the same page to complete this setting.
194
User Guide
Value" barcode on page 228 for the desired character string.
Value" barcode on page 227 for the desired field length.
Select
Field Separator
to Divide Field 1...
*Include Separator
Discard Separator
Divide Field 1
by Length
End Programming Format