Using Bluetooth ® Dongle - CipherLab Cipher Lab 1560 User Manual

1560 Series Barcode Scanner
USING BLUETOOTH
®
1) Refer to 3.2.3 Connect to Dongle
request from your computer.
2) Read the following barcodes in sequence to configure the scanner to use BT SPP as
download interface.
3) Read the following barcodes in sequence for the scanner to enter the download mode.
The scanner will respond with beeps to indicate it is ready for downloading.
4) Run the download utility "ProgLoad.exe" on your computer.
Kernel Program
K1560_V*.shx
210
User Guide
DONGLE
Enter Setup
Enter Setup
for the target scanner to accept the connection
Activate BT SPP
Update
Download
User Program
STD1560_V*.shx
Enter Setup