CipherLab Cipher Lab 1560 User Manual page 24

1560 Series Barcode Scanner
Working Mode
Upon powering up, the 1560/1562 scanner will try to establish a connection with 3656 or a
computer with Bluetooth
for details. The connection between the scanners and 3656 is made easy and reliable.
Note: If RS-232, USB Virtual COM or BT SPP is selected for output interface, the host can
directly send serial commands to configure the scanner. For example, run
HyperTerminal.exe and type the 6-digit command located under each setup
barcode. Refer to
12
User Guide
®
wireless technology. Refer to
Appendix II Host Serial
Chapter 3 – Setting up a WPAN Connection
Commands.
Enter Setup