CipherLab Cipher Lab 1560 User Manual page 43

Send Data
The 512 KB flash memory on the scanner can store up to 32,768 scans based on EAN-13 barcodes.
When it is used up, the scanner will respond with two short beeps (high-low tone) as a warning.
You are advised to send data to the host immediately by having the scanner read the "Send Data"
barcode below. It will resume the previous WPAN connection with the host temporarily.
Clear Data & Confirm
Even though data has been sent back to the host, the flash memory is still occupied unless you
erase the memory by having the scanner read two barcodes – "Clear Data" and "Confirm".
1. Read the "Clear Data" barcode to clear the flash memory.
2. Read the "Confirm" barcode to confirm the action.
Chapter 1 Understanding the Barcode Scanner
8 sec
Send Data
Clear Data
Confirm
Update
31