GRAUPNER mz-24 HOTT Operating Instruction page 48

ACT CTL
A B
Touch
ACT CTL
A B
Touch
ACT CTL
A B
Touch
ACT CTL
A B
Touch
48
ACT CTL
A B
Touch
ACT CTL
A B
Touch
11-2. Curve mixing type
ACT CTL
In the prog.mix page, touch "NEXT" icon to call the next page. Number 6~8 are used for PRO.
A B
MIX curve mixing. Touch any of them to switch to ON in ACT line. If so, mixing is available to
use.
Touch
Touch "NONE" in MST line to access the channel selection page and touch and activate
"NONE" icon to select the desired channel of MST and SLV. Touch "BACK" icon to return to
the prog.mix page. Touch ">>" icon to call the program mixing setup page. Now, you need to
set CTL function.
- CTL setup with a switch
ACT CTL
Touch "ON" icon in CTL line to call "Select" message popup then move the switch with your
A B
choice then that switch is designated as on/ off switch and then the switch direction setup
page appears. You may select ON or OFF by touching icons. When the switch is moved to the
Touch
direction of ON, the function is operated. Touch "BACK" icon to return to the program mixing
setup page.
Touch
ACT CTL
A B
Touch
Telemetry
ACT CTL
A B