GRAUPNER mz-24 HOTT Operating Instruction page 76

After "D/R", "EXP" setup, perform CTL setup. It is used to assign the switch to D/R, EXP function
Touch "NULL" icon in CTL line to call "Select" message popup and move the switch that you want
to use then that switch is set on/ off switch and the switch direction setup page appears. You may
select ON or OFF by touching icons. When the switch is moved to the direction of ON, the function
is operated. Touch "Back" icon to return D/R, EXP setup page. When D/R, EXP switch is off, D/R,
EX is returned to the default setup.
Touch
If you want to use stick instead of switch for "D/R", "EXP" function, Touch SW6 in CTL line to call
Touch
"Select" message popup and move the stick with your choice then that stick is selected as on/ off
stick and the stick direction setup page appears. In the direction setup page, move and hold the
stick to the position that you can comfortably reach and touch "ENT" icon on the right bottom.
When the mark of the control stick is only in the black bar, D/R, EXP function is operated. The val-
ue of set position is displayed in POS. If you touch REVERSE in "DIR" line, all setup is reversed.
To set "ON" or "OFF" at the both end of stick operation range, touch "SINGLE" icon to switch to
"DUAL" then D/R, EXP function is on or off at the both end of stick operation range. You may set
ELEV and RUDD channel in the same way. We recommend to set 5~12 channels to Q.LINK since
they don't have on/off setup in D/R, EXP. When the setting is completed, touch "BACK" icon to
Touch
return the function page.
Touch
Touch
Touch
Touch
Touch
76