GRAUPNER mz-24 HOTT Operating Instruction page 22

Touch
When START SW setup is completed, you may set RESET SW function. Touch the "NULL" icon
in "RESET SW" to call "select" message popup. Now, move the switch with your choice then this
switch is set to on/ off switch for "RESET SW" and the switch direction setup page appears. You
may change ON/OFF by touching icons. When the switch is moved to the direction of ON, the
function is operated. Touch "Back" icon to return TIMER setup page
Touch
Touch
22
Touch
Touch
After RESET SW is set, you may set "LAP SW" function. Touch "NULL" icon in "LAP SW" to
call "select" message popup. Now, move the switch with your choice then this switch is set
on/ off switch for "LAP SW" and the switch direction setup page appears. You may change
ON/OFF by touching icons. When the switch is moved to the direction of ON, the function is
operated. Whenever the LAP SWITCH is on, Lap time is saved into LAP list. Touch "BACK"
icon on the left top to call Timer setup page. In order for you to check the LAP list, Touch ">>"
icon in LAP List to call LAP list page. Up to 100 ea of Lap time can be saved and only 20ea is
displayed in the page. For the next LAP list, touch "NEXT" icon. If touching "CLR" icon on the
right top, LAP list is deleted. Touch "BACK" icon to call Timer setup page.
Touch
Touch
Touch