Contents • Before Use • Support and Service - Customer support - Internet sales site - A/S regulation - Warranty regulation • Openhobby A/S Center 1. Introduction 2. Flying Safety 3. Features - Specification 4. Operation 5~6P 1) Binding 6~7P 2) Range check 3) Fail-safe function 4) Range warning...
• BEFORE USE Thank you for purchasing Graupner HoTT 2.4GHz receiver. It is the common manual for GR-12S (6 Channels), GR-16L (8 Channels), GR-24L (12 Channels), GR-32L (16 Channels). This system is extremely versatile and may be used by beginners and pros alike.
1. INTRODUCTION Graupner HoTT receivers are compatible with all of Graupner transmitters and used to airplane, helicopter and glider. HoTT system gives user real-time information on various useful data such as user model’s RPM, voltage, temperature, user programmable warn- ing, and so on which are directly obtained from telemetric speed controllers equipped with this HoTT system without having to install separate sensor devices.
- SPECIFICATION Model Name GR-12S GR-16L GR-24L GR-32L Channel 6 channels 8 channels 12 channels 16 channels Frequency 2400~2483.5 MHz 2400~2483.5 MHz 2400~2483.5 MHz 2400~2483.5 MHz Modulation 2.4GHz FHSS 2.4GHz FHSS 2.4GHz FHSS 2.4GHz FHSS Temperature Range -15~+70˚C -15~+70˚C -15~+70˚C -15~+70˚C...
Page 6
Before every flying session and especially with a new model, it is important to perform a range check. All Graupner aircraft transmitters incorporate a range testing system which, when activated, reduces the output power, allowing a range check. Notice that every flying must not be permitted in the range checking mode and the model is restrained on the ground.
Page 7
CAUTION During normal operations (i. e. when controlling a model) never enter the range check mode ! 3. Fail-safe function In its default state, the receiver is set to “Hold” mode. If you lose connection, all channels hold last given command and the status LED on the receiver turn solid red. The transmitter also repeats a single warning beep every second.
Page 9
GR-12S are Channel 5, This socket is used for Telemetry interface by the optional telemetry sensors, updating the latest Graupner Firmware by the USB interface and programming by the SMART BOX. The socket polarity is marked as +,- on the case: brown wire (-), red (+) and orange (T).
7. FIRMWARE UPDATE For more information on the latest firmware and the related software, please refer to the download menu on our website www.openhobby.com, www.graupner-sj.com NOTICE: The optional USB PC Interface, HoTT PC Interface zender and HoTT Adapter cable are needed to update.
- EN 301 489-1 V1.8.1 - EN 301-489-3 V1.4.1 - EN 301-489-17 V1.3.2 - EN 300 328 V1.7.1 • FCC Information Product(s) : Graupner HoTT Receiver GR-12S(6 channels), GR-16L(8 channels), GR-24L(12 channels), GR-32L(16 channels) GR-12S GR-16L GR-24L GR-32L FCC ID :...
Page 12
This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. • KC Information Product : Graupner HoTT Receiver GR-16L(8 channels), GR-24L(12 channels), GR-32L(16 channels) 국립전파 연구원의 전자파 적합등록을 획득하였습니다. (This product is certified and registered from Korean National Radio Research Agency.)
Page 13
KCC인증번호: KCC-CRM-sjr-16003120 방송통신위원회고시 제2013-01호 GR-16L 방송통신위원회고시 제2012-102호 “신고하지 아니하고 개설할 수 있는 무선기기” KCC인증번호: KCC-CRM-sjr-16003210 방송통신위원회고시 제2013-01호 GR-24L 방송통신위원회고시 제2012-102호 “신고하지 아니하고 개설할 수 있는 무선기기” KCC인증번호: KCC-CRM-sjr-16004010 방송통신위원회고시 제2013-01호 “무선설비규칙” GR-32L 방송통신위원회고시 제2012-102호 “신고하지 아니하고 개설할 수 있는 무선기기”...