Procedure; Update Procedure - Ricoh MP 305 Plus Field Service Manual

5. System Maintenance
• Even when not using a RPCS driver, the XPS driver requires RPCS firmware.

Procedure

• A SD card is a precision device, so when you handle an SD card, respect the following.
• When the power is turned ON, do not insert or remove a card.
• During installation, do not turn OFF the main power.
• Since the card is manufactured to high precision, do not store it in a hot or humid location, or in
direct sunlight.
• Do not bend the card, scratch it, or give it a strong shock.
• Before downloading firmware on an SD card, check whether write-protection of the SD card is
canceled. If write-protection is enabled, an error code (error code 44, etc.) will be displayed
during download, and the download will fail.
• Before updating firmware, remove the network cable from this machine.
• If SC818 is generated during software update, turn OFF then ON the main power, and complete
the update which was interrupted.
• During software update, network cables, remove interface cables, wireless boards, etc., (so that
they are not accessed during update).

Update procedure

1. First download the software to be updated to the SD card.
2. Turn OFF the main power.
3. Remove the SD card slot cover [A].
326