Power Stacker; Auto Elevator; Printer Management Port; Top Exit Tear Distance - IBM 6500 User Manual

Power Stacker

This parameter determines whether or not the power paper stacker is enabled,
which is the default, or disabled. This parameter is not presented if the power
paper stacker is not installed.
v Enable (the default)
v Disable

Auto Elevator

This parameter exists only on printers with the power paper stacker installed. The
power stacker has a sensor which detects paper movement and raises the stacker
as the printed paper stack grows. If the printer has been printing for three minutes
continually and the sensor has not detected any growth in the paper stack, the
stacker raises itself ¼ inch automatically.
v Enable (default). The automatic elevator on the power stacker operates normally.
v Disable. The stacker does not raise automatically every three minutes and is

Printer Management Port

Printer Management Port is the port used to connect the printer to the IBM Printer
Management Unit (PMU). This menu option is a printer management tool that
runs on Host Computers. The options include:
v Debug Ethernet (default)
v Debug Adapter
v Disable
v Serial

Top Exit Tear Distance

The eject distance for the EJECT/RESTORE type TOP EXIT TEAR.
v 7.46 Inches (default)
v 4.50 - 10.50 Inches
62
Infoprint 6500 User's Manual
entirely dependent on the sensor. Disable is used with extremely high-quality
print jobs that take a long time to print.