Table of Contents
Advertisement
Bosch Video Management System
2.
3.
To remove an item:
1.
2.
Notice!
i
To restore a removed item, right-click the DVR device and click Rescan DVR Device.
To rename a DVR device:
1.
2.
Related Topics
–
7.12
Configuring a Bosch Allegiant device
Main window >
You do not configure the Bosch Allegiant device itself but only the Bosch VMS related
properties.
To assign an output to an encoder:
1.
2.
3.
Adding an input to a Bosch Allegiant device:
1.
2.
3.
Deleting an input:
1.
2.
3.
7.13
Configuring a startup Command Script
Main window >
You configure a Command Script to be started when the Operator Client on the selected
workstation is started.
You must create a corresponding Command Script.
For creating a Command Script, see Managing Command Scripts, page 104.
To configure a startup script:
4
Bosch Sicherheitssysteme GmbH
Select the desired devices and click Next >>.
The next Bosch VMS Scan Wizard dialog box for entering the connection password for
DVR devices is displayed.
In the Password column, type in the appropriate passwords and click Finish.
The selected DVR devices are added.
Click the Settings tab, the Cameras tab, the Inputs tab, or the Relays tab.
Right-click an item and click Remove. The item is removed.
Right-click a DVR device and click Rename.
Type the new name for the item.
DVR (Digital Video Recorder) page, page 144
Devices > Expand
Click the Outputs tab.
In the Usage column, click Digital Trunk in the desired cells.
In the Encoder column, select the desired encoder.
Click the Inputs tab.
Click Add Inputs. A new row is added to table.
Type the required settings in the cells.
Click the Inputs tab.
Click the required table row.
Click Delete Input. The row is deleted from the table.
Devices > Expand
In the Startup script: list, select the required Command Script.
>
>
Configuration Manual
Configuring devices | en
> Settings page
2013.03 | V1 | Configuration Client
71
Advertisement
Table of Contents
