Table of Contents
Advertisement
Bosch Video Management System
2.
3.
4.
To perform IQN mapping:
1.
2.
3.
4.
7.29
Adding a DSA E-Series iSCSI device
Main window >
Series Device > Add DSA E-Series Device dialog box
or
Main window >
Bosch VMS Scan Wizard > Next >> > Add DSA E-Series Device button > Add DSA E-Series
Device dialog box
To add:
1.
2.
3.
Related Topics
–
Bosch Sicherheitssysteme GmbH
Right-click
and click Scan ISCSI Device.
The process is started.
Targets and LUNs are detected and added to the Device Tree below the iSCSI node.
Click
to save the settings.
Click
to activate the configuration.
Expand the appropriate VRM device
.
Right-click
and click Map IQNs.
The iqn-Mapper dialog box is displayed and the process is started.
The encoders that are assigned to the selected VRM device are evaluated and their IQNs
are added to this iSCSI device.
Click
to save the settings.
Click
to activate the configuration.
Devices >
Devices > Expand
Type in a displayname, the management IP address and the password.
Click Connect.
If connection is established, the fields in the Controller group and the 2nd Controller
group are filled.
Click OK.
The device is added to the system.
Add DSA E-Series Device dialog box, page 165
and
> Expand
> Right-click
Configuration Manual
Configuring devices | en
, click the appropriate iSCSI device
> Right-click
> Add DSA E-
> Scan VRM Devices >
2013.03 | V1 | Configuration Client
77
Advertisement
Table of Contents
