Table of Contents
Advertisement
Bosch Video Management System
Resources...
Click to display the Resource Manager dialog box. Select a document with a description of
the corresponding workflow.
Display a comment box
Select the check box to enable displaying a comment box in case of an alarm. In this comment
box the user can type comments on the alarm.
Force the operator to process the workflow
Select the check box to force the user to process the workflow. If selected, the user cannot
clear the alarm until he has entered a comment on the alarm.
Execute the following Client Script when alarm is accepted:
Select a Client Command Script that is executed automatically, when the user accepts an
alarm.
Analog Monitor Group tab
1...10
In a numbered column, click a cell and select a camera from the Logical Tree. This camera will
be displayed in the assigned monitor in case of an alarm.
Clear table
Click to remove all camera assignments to analog monitor groups.
Alarm title
Select the check box to configure that the title of the alarm is displayed on the analog
monitors as an on-screen display.
Alarm time
Select the check box to configure that the time of the alarm is displayed on the analog
monitors as an on-screen display.
Alarm date
Select the check box to configure that the date of the alarm is displayed on the analog
monitors as an on-screen display.
Alarm camera name
Select the check box to configure that the name of the alarm camera is displayed on the
analog monitors as an on-screen display.
Alarm camera number
Select the check box to configure that the number of the alarm camera is displayed on the
analog monitors as an on-screen display.
Only on 1st monitor
Select the check box to configure that the title and the time of the alarm is displayed only on
the first monitor of the analog monitor group as an on-screen display.
Bosch Sicherheitssysteme GmbH
Configuration Manual
Alarms page | en
217
2013.03 | V1 | Configuration Client
Advertisement
Table of Contents
