Table of Contents
Advertisement
56
en | Getting started
7.
6.7
Starting Configuration Client
Only the user called Admin can log on to Configuration Client.
Note:
You cannot start Configuration Client when another user on another computer in the system
has already started Configuration Client.
To start Configuration Client:
1.
2.
3.
4.
6.8
Configuring the language of Configuration Client
You configure the language of your Configuration Client independently of the language of your
Windows installation.
To configure the language:
1.
2.
3.
6.9
Configuring the language of Operator Client
You configure the language of your Operator Client independently of the language of your
Windows installation and of your Configuration Client. This step is performed in the
Configuration Client.
To configure the language:
1.
2.
3.
4.
2013.03 | V1 | Configuration Client
logging on. If you create an account and log on before activating, the License Manager
keeps track of your activations. You can then review this at any time.
Follow the instructions to obtain the License Activation Key.
Return to the Bosch VMS software. In the License Activation dialog box, type the License
Activation Key obtained from the License Manager and click Activate.
The software package is activated.
From the Start menu, select Programs > Bosch VMS > Config Client.
The dialog box for logging on is displayed.
In the User Name: field, type your user name.
When you start the application for the first time, enter Admin as user name, no password
required.
In the Password: field, type your password.
Click OK.
The application starts.
On the Settings menu, click Options....
The Options dialog box is displayed.
In the Language list, select the desired language.
If you select Default system language, the language of your Windows installation is used.
Click OK.
The language is switched after the next restart of the application.
Click User Groups >
In the Language: list, select the desired language.
Click
to save the settings.
Click
to activate the configuration.
Restart Operator Client.
. Click the User Group Properties tab.
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
