Adding A Command Script; Managing Pre-Configured Camera Sequences - Bosch MBV-BPRO-45 Configuration Manual

84 en | Configuring the structure
2.
3.
To export a resource file:
1.
2.
3.
8.5

Adding a Command Script

Main window >
Before you can add a Command Script, you must have Command Script files imported or
created.
If required, see Configuring Command Scripts, page 104 for details.
To add a Command Script file:
1.
2.
3.
4.
8.6

Managing pre-configured camera sequences

Main window >
You can perform the following tasks for managing camera sequences:
–
–
–
–
Notice!
When the configuration is changed and activated, a camera sequence (pre-configured or auto-
matic) usually is continued after restart of the Operator Client.
But in the following cases the sequence is not continued:
i
A monitor where the sequence is configured to be displayed has been removed.
The mode of a monitor (single/quad view) where the sequence is configured to be displayed
has been changed.
The logical number of a monitor where the sequence is configured to be displayed is
changed.
2013.03 | V1 | Configuration Client
Click .
The Replace Resource dialog box is displayed.
Select a file with the appropriate content and click Open.
The resource name persists, the original file name is exchanged with the new file name.
Select a resource file.
Click .
A dialog box for selecting a directory is displayed.
Select the appropriate directory and click OK.
The original file is exported.
Maps and Structure
Select a folder where you want to add the new Command Script.
Click . The Select Client Script dialog box is displayed.
Select a file in the list.
Click OK.
A new Command Script is added under the selected folder.
Maps and Structure
Create a camera sequence
Add a step with a new dwell time to an existing camera sequence
Remove a step from camera sequence
Delete a camera sequence
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH