Nvr & Decoder Scan Dialog Box; Bosch Vms Scan Wizard - Bosch MBV-BPRO-45 Configuration Manual

Video management system
Table of Contents

Advertisement

136
en | Devices page
Displays the devices which have duplicate IP addresses or a default IP address (192.168.0.1).
Allows you to change such IP addresses and subnet masks.
You must enter the correct subnet mask before changing an IP address.
17.3
NVR & Decoder Scan dialog box
Main window >
Displays detected encoders, NVRs, and decoders.
Allows you to assign detected encoders to an NVR. This is required to store the video data of
the encoder on an NVR and to manage events of their assigned devices.
Unassigned devices do not appear in the Device Tree.
Notice!
Only devices in the local subnet are detected automatically. If a device is located in another
i
subnet, add it manually to the Device Tree. To perform this, right-click the required node (for
example an NVR), click Add Encoder, type the IP address of the device, click the Network tab
and enter the subnet mask of the device.
Unassigned Encoders
Displays the unassigned encoders that were detected.
Assigned Encoders and NVRs
Displays assigned encoders and NVRs. NVRs are automatically assigned when they are
detected. For assigning encoders you must drag them from the Unassigned Encoders list to
an NVR.
Decoders
Displays the detected decoders.
Configure Devices
Click to display the IP Device Configuration dialog box.
Next >
Click to display the next page of this dialog box. If the device names differ from their names in
Bosch VMS, a dialog box is displayed for changing the names as required.
Finish
Click to confirm the scan results and the assignments of encoders and close the dialog box.
17.4

Bosch VMS Scan Wizard

Main window >
Allows you to detect the following devices and assign them to Bosch Video Management
System:
Assign
Click to assign selected devices to their parent device. For example you assign encoders to a
VRM.
2013.03 | V1 | Configuration Client
Devices >
Devices >
VRMs, iSCSI storage devices (you can assign encoders during the scan process)
Live only and local storage encoders
VIDOS NVRs
NVR & Decoder Scan
VRM & iSCSI Devices Scan
Configuration Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH

Advertisement

Table of Contents
loading

Table of Contents