Table of Contents
Advertisement
Bosch Video Management System
Input Name
Type the required name of the input.
17.14
Workstation page
Main window >
Allows you to configure the following settings for a workstation:
–
–
–
–
–
A workstation must have the Operator Client software installed.
To add a Bosch IntuiKey keyboard that is connected to a decoder, expand
To assign an analog monitor group, configure such a group in
17.14.1
Settings page
Main window >
Allows you to configure a script that is executed when the Operator Client on the workstation
is started.
Allows you to configure which stream of an IP device is used for live display.
Allows you to enable Forensic Search for this workstation.
And you can configure the keyboard that is connected to this workstation.
Network address:
Type the DNS name or the IP address of your workstation.
Startup script:
Select the desired script that you want to be started when the workstation's Operator Client
is started. You create or import such a script on the Events page.
Override recording settings
Select the check box to enable selecting the desired stream for live view. The other one is
used for continuous, motion, and alarm recording for this workstation.
See dual streaming in the glossary.
Enable Forensic Search
Click to enable Forensic Search for this workstation.
Use direct playback from storage
Select the check box to send the video stream directly from the storage device to this
workstation. Now the stream is not sent via VRM. The workstation still needs connection to
the VRM to ensure correct playback.
Retrieve Live video from Streaming Gateway instead of camera
Displays the list of Video Streaming Gateway devices. Select the desired entries to enable the
transmission of video data via low bandwidth segments between the video source and this
workstation.
Bosch Sicherheitssysteme GmbH
Devices > Expand
Add a CCTV keyboard connected to a Bosch Video Management System workstation.
Assign a Command Script that is executed on startup of the workstation.
Select the data stream for live display.
Enable Forensic Search.
Assign analog monitor groups to a workstation.
Devices > Expand
>
>
Configuration Manual
Devices page | en
, click
>
>
> Settings tab
2013.03 | V1 | Configuration Client
147
.
.
Advertisement
Table of Contents
