Tripad Configuration - Javad DELTAGNSS Receiver Operator's Manual

Also the binary message jps/ha is activated by the command em,,jps/ha. The structure is described
below:
struct
{
f4 heading; // in degrees
f4 pitch; // in degrees
u1 type; // between antennas base line solution type
u1 cs; // check sum
}

3.3. TriPad Configuration

The DELTA's simple user interface (TriPad) consists of two buttons (Power and FN) and up to six
LEDs that control and display the receiver's operation (Figure 3-14).
ON/OFF
button
STAT LED
The TriPad performs numerous functions:
• Turn the receiver on/off.
• Turn data recording on or off (FN button).
• Show the status of satellites being tracked (STAT LED).
• Show data recording status (REC LED).
• Show each time data records to internal memory (REC LED).
www.javad.com
Figure 3-14. DELTA TriPad
Configuration
TriPad Configuration
How to Work with DELTAD-G2/G2D
FN
button
REC LED
43