Establishing An Rs232 Cable Connection; Establishing A Usb Cable Connection - Javad DELTAGNSS Receiver Operator's Manual

Pre-measuring Preparation
Connecting the Receiver and a Computer

Establishing an RS232 Cable Connection

2.3.1. Establishing an RS232 Cable Connection
1. Using the RS232 cable, connect the serial port of your computer (usually COM1) to the
receiver's serial port A.
2. Press the power buttons on the receiver and computer to turn them on.
3. Connect to the desired configuration software (TriVU).

2.3.2. Establishing a USB Cable Connection

Make sure the computer has JAVAD GNSS's USB driver installed (available from
www.javad.com) before continuing.
1. Using the USB cable, connect the USB port on the receiver to a USB port on the computer.
2. Press the power buttons on the receiver and computer to turn them on.
26
Figure 2-2. Connection via RS-232
www.javad.com