Specifications
Receiver Specifications
General Details
LEDs
Operating temperature
Storage temperature
Humidity
External power input
Input voltage
Communication Ports
Connectors
TriPad
Up to 100 Hz update rate for real time position and raw data (code and carrier)
10 cm code phase and 1 mm carrier phase precision
Hardware Viterbi decoder
RTCM SC104 versions 2.x and 3.x Input/Output
NMEA 0183 versions 2.x and 3.0 Output
Multi-Base Code Differential Rover
Code Differential Base
Geoid and Magnetic Variation models
RAIM
Different DATUMs support
Output of grid coordinates
Low signal tracking
Advanced Multipath mitigation
KFK WAAS/EGNOS (SBAS)
Adjustable PLL and DLL parameters
In-Band Interference Rejection
NMEA version
78
Two LEDs:
STAT – satellite and receiver status
REC – record and data status
Environment
-40° C to +80° C
-45° C to +85° C
95% non-condensing
External power
1 port
+4.5 to +35 V DC
I/O
- 3x serial (RS232) up to 460.8 kbps
- serial (RS422) up to 460.8 kbps
- High speed USB 2.0 device port (480 Mbps)
- Full-duplex 10BASE-T/100BASE-TX Ethernet port
- External GNSS Antenna
- External power (PWR)
- CAN (optional)
- up to two 1PPS output (optional)
- up to two Event Marker input (optional)
- Two LEDs (STAT, REC)
- Two function buttons (ON/OFF, FN)
Data Features
Technology
2
(IBIR) (DELTAS-G3TAJ only)
NMEA
Ver. 2.1, 2.2, 2.3, 3.0
1
www.javad.com
Need help?
Do you have a question about the DELTAGNSS Receiver and is the answer not in the manual?