Change Passcode; Chime Circuits; Alter Shunt Group; Print System Log - Menvier Security TS690 Installation & Programming Manual

TS690 & TS690ID Installation Manual

Change Passcode

This option allows the engineer to change their
passcode. The default passcode is 1234 but the
installation engineer should change this to their
own personal 4 digit passcode.
LCD
Engineers menu 2
Select Option :-
Change pass code
New code > ----
Enter new passcode
e.g. 2580
Change pass code
New code > 2580
Change Passcode Flowchart

Chime Circuits

This option allows an alternative method of
programming circuits as "chime".
LCD
Engineers menu 2
Select Option :-
Alter Chime ccts
Enter CCT No.>--
Enter circuit No.
e.g. 10
Circuit text
Font Door
CCT 10 Silent
Circuit No &
Status
A
= Next Circuit
B
= Alternate Chime/Silent
C
= Previous Circuit
Chime Circuits Flowchart
Starburst
ENGR 2 -
4
----
2580
ENT
Starburst
ENGR 2 -
5
CCT 01-S
CCT 10-S
ESC
[2.4]

Alter Shunt Group

Circuits can be assigned to the shunt group. The
shunt group can be isolated by using user menu 1
option 6 or by using a "Shunt" code see "User
Manual".
LED
E2 -
----
Circuit text
Circuit No. &
2580
Status
[2.5]

Print System Log

The system log stores 700 events, if a printer is
connected to the system it is possible to print a
LED
selected number of events. Once the printout has
been started it can only be stopped by selected
E2 -
this option again and entering "000" for the
number of events.
01-S
10-S
Engineer's Menu 2
LCD
Engineers menu 2
Select Option :-
6
Alter Shunt Grp
Enter CCT No.>--
Enter circuit No.
e.g. 09
Roller Door
CCT 09 Omitted
A
= Next Circuit
B
= Alternate Armed/Omitted
C
= Previous Circuit
ESC
Alter 24hr Group Flowchart
LCD
Engineers menu 2
Select Option :-
7
Print System Log
No. events> ---
Enter number of events
e.g. 100
Print System Log
No. events> 100
ENT
to start printing
Print System Log Flowchart
[2.6]
LED
Starburst
ENGR 2 - E2 -
CCT 01-A 01-A
CCT 09-O 09-O
[2.7]
Starburst LED
ENGR 2 - E2 -
--- ---
100 100
41