TS690 & TS690ID Installation Manual
LCD Only
Engineers menu 2
Select Option :-
Modem options
Select Option :-
018112345678
|elephone No. 1
Enter telephone Number
018112345679
|elephone No. 2
Enter telephone Number
0001
|Account No. 1
Enter account number
0001
|Account No. 2
Enter account number
* 2 3 4 * * * *
Reports 1
Use keys 1 - 8 to toggle
channels 1 - 8.
* 2 3 4 * * * *
Reports 2
Use keys 1 - 8 to toggle
channels 1 - 8.
* * * 4 * * * *
Set/Day
Use keys 1 - 8 to toggle
channels 1 - 8.
* 2 3 4 * * * *
Restore
Use keys 1 - 8 to toggle
channels 1 - 8.
Program Digicom Flowchart
C
6
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ESC
Digicom Tests
This option allows the engineer to test each
channel on the plug-on digi-modem (DC6) and
the five digi outputs on the main PCB.
Engineer menu 2
Select Option :-
Modem options
Select Option :-
Digi, Idle
>* * * * * * * *
Press [1] to [8] to select
the channel
e.g. 1234
Plug-on
Digi status
Digi, Active
>1 2 3 4 * * * *
Active outputs
Digicom Tests Flowchart
Reset Digi-Modem
When the system is powered up, the control panel
automatically logs-on the digi-modem (DC6). If
the device is changed or removed from the
system you must either power the system down
and back up again, or select this menu option in
order for the digi-modem to be log-on again.
LCD Only
Engineers menu 2
Select Option :-
Modem options
Select Option :-
Acceptance tone indicates
reset performed
Reset Digi-modem Flowchart
Engineer's Menu 2
LCD
C
7
ESC
C
0
47