Table of Contents
Advertisement
TS700 Installation Manual
Change Date
The system calendar may be changed by entering the date as four digits representing the day
and month e.g., 0207 is the 2nd July.
1.
Ensure that "Engineer Menu 2" is selected.
2.
Press 3 to select the Change Date option.
3.
Enter the date as four digits.
4.
Press [ to accept.
Change Engineer's Passcode
The factory default engineer's passcode is set to 1234, but the installation engineer should change
this to their own personal four-digit passcode, as follows:
1.
Ensure that "Engineer Menu 2" is selected.
2.
Press 4 to select the Change Engineer's Passcode option.
3.
Enter the new passcode then press [ to accept.
4.
A high tone will indicate acceptance. A low tone sound will
indicate that the passcode is not available.
Configure Chime Circuits
This option is used to select the circuits that will chime.
1.
Ensure that "Engineer Menu 2" is selected.
2.
Press 5 to select the Chime Circuits option.
3.
Circuits will be displayed as Y(Yes) to chime or N(No) not to
chime. Change status by pressing 0 ("toggle" action).
4.
Press [ to accept (high tone) and go to next circuit. Circuits may
be selected by number. Press ] to quit.
Configure 24 Hour Omit Group
This option allows the engineer to select the 24 hour circuits that will be omitted when the 24 hour
omit option is selected in "User Menu 1" option 6.
1.
Ensure that "Engineer Menu 2" is selected.
2.
Press 6 to select the 24hour Omit Group option.
3.
Circuits will be displayed as O(Omitted) or A(Armed). Press 0 to
change ("toggle" action).
4.
Press [ to accept (high note) and go to next circuit. A low tone
indicates that the circuit cannot be omitted.
5.
Circuits may be selected by number. Press ] to quit.
Programming
----
Enter date (day & month).
0207
Date entered 0207 (02 July).
----
Enter new engineer passcode.
2804
New passcode 2804 entered.
Press ENT to accept.
01-N
Circuit 01 will not chime.
Press 0 to change.
01-Y
Circuit 01 will chime.
Press ENT to accept.
02-A
Circuit 02 will remain Armed.
Press 0 to change.
02-O
Circuit 02 will be Omitted.
Press ENT to accept.
23
Hide quick links:
Advertisement
Table of Contents
